49 fox electronics 5570 enterprise parkway fort myers, florida 33905 941-693-0099 fax 941-693-1554 http://www.foxonline.com ? 1998 fox electronics surface mount hcmos clock oscillators fso-2 series the fso series is compatible with both ttl and hcmos technologies. the j-leaded configuration and high resistance to soldering temperature make it ideal for surface mount production processes. the fso offers the low power consumption of hcmos, but will drive a full 10 ttl gates when used in a ttl application. this part is built to withstand vapor phase and other high temperature soldering operations and to give long term outstanding performance and reliability. for mechanically and electrically equivalent lower cost alternative see page 50. features ? extended temperature range ? solderable @ 260 for 10 sec. ? tape and reel (1,000 pcs. std) inch dimensions shall govern. all dimensions are in inches & parenthetically in millimeters. see page 63 for tape and reel specifications. units mhz ppm oc v ma % ns v ma pf ttl ms ns ? electrical characteristics (ta = 25 c, v dd = 5.0v, c l = max load) max 66.667 +100 --- +70 +125 +5.5 35 20 60 --- 7 7 7 7 0.4 4.0 -4.0 50 10 100 min 26.000+ -100 ---- -10 -55 +4.5 40 --- 4.6 max 66.667 +100 +200 +70 +125 +5.5 35 28 --- 55 5 5 5 5 0.4 8 -0.4 5 10 100 min 26.000+ -100 -200 -10 -55 +4.5 --- 45 2.4 fso-2h fso-2t fso-2 * inclusive of 25oc tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *** an internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. see page 35 for mechanical specifications, test circuits, and output waveform. note: 50ppm frequency stability at -10 to +70c also available (up to 55 mhz) note: a 0.01f bypass capacitor should be placed between v dd (pin 4) and gnd (pin 2) to minimize power supply line noise. all specifications subject to change without notice. rev. 6/9/98 actual size pin connections #1 e/d** #3 output #2 gnd #4 +5v dc parameters frequency range frequency stability * temperature range operating (t opr ) storage (t stg ) supply voltage (v dd ) input current (i dd ) output symmetry rise time (t r ) fall time (t f ) output voltage (v ol ) (v oh ) output current (i ol ) (i oh ) output load start-up time (t s ) output enable/disable time max 26.000 +100 +200 +70 +125 +5.5 23 12 60 55 8 8 8 8 0.4 16 -0.4 50 10 4 100 min 1.025 -100 -200 -10 -55 +4.5 40 45 4.6 conditions -10c ~ +70c -40c ~ +85c no load output disabled (i z ) 2.5v 1.4v 1.0v ~ 4.0v 0.4v ~ 2.4v 4.0v ~ 1.0v 2.4v ~ 0.4v i ol = max i oh = max v ol = max v oh = min hcmos ttl oscillators output (pin 3) active active high z inh (pin 1) open *** '1' level v ih 3 2.0 v (fso-2 / fso-2h) '1' level v ih 3 3.5 v (fso-2 t) '0' level v il 0.8 v (fso-2 / fso-2h) '0' level v il 1.5 v (fso-2 t) ? enable / disable function **
70 fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1(239)693-0099 fax +1(239)693-1554 http://www .foxonline.com ? 2004 fox electronics fox electronics part description 1 guide for oscillators 1 make selection from product family in fox catalog or foxonline.com for example: f5c-2e 2 frequency mhz customer fills in 3 stability 2 pick from section a 4 operating temp 2 5 smd packag- ing 6 fox use 7/8 value added 9 custom section a a 100ppm b 50 ppm c 30ppm d 25ppm e 20ppm f 15ppm g 12ppm h 10ppm j 7.5ppm k 7ppm l 5ppm m 4ppm n 3ppm p 2.5ppm r 2ppm s 1.5ppm t 1ppm operating temp. range a = 0o to +50oc b = -10o to +50oc c = 0o to +70oc d = -10o to +60oc e = -10o to +70oc f = -20o to +70oc z = -25o to +75oc g = -30o to +70oc h = -30o to +75oc j = -30o to +80oc k = -30o to +85oc l = -35o to +80oc v = -35o to +85oc m = -40o to +85oc smd packaging 0 = tape/reel* 250 = 250 500 = 500 1000 = 1000 value added m = special marking n = cut base s = bulk z = smd tape custom c = custom place attach drawing and/or additional electrical specs for our engineering department. (####.######) notes: 1 fox unique part numbers for non-standards are randomly generated based on the elements of the part description in a format: ### - frequency - random # (099-22.1184-39789 is fox unique part number). 2 all combinations are not possible. * 0 = tape/reel assumes that no quantity per reel was specified: therefore, the fox production smd reel quantities list applies. for any other quantities specified a broken reel charge will apply. fox production smd reel quantities f310 series 2k f340 series 2k f330 series 2k f510l series 2k f540l series 2k f520l series 2k f530l series 2k f4200 series 2k f4500 series 2k f4400 series 2k f4300 series 2k f4100 series 2k f3345 series 2k f4600 series 2k f4700 2k rfx250 2k rfx300 2k fso series 1k
|
